Dec. 7-9: VisSim at TI MSP430 Advanced Technology Conference in Munich

We will be demonstrating VisSim generating super tight code with the IAR C compiler. We will show off our MSP430 blocks that generate automatic code for MSP430 peripherals like ADC, GPIO, PWM, SCI, 7 and 14 segment LCD, power mode control, clock DCO control etc.

 See you there!

We will be showing VisSim in action creating TI DSP and MSP430 based controllers for a live PWM inverters and an encoder sensed fan/vane angle experiment. Ask us about a free pass.

 See you there!

Nov. 9-16: VisSim at TI European Developers Conference in Paris and Birmingham

We will be showing VisSim in action creating TI DSP and MSP430 based controllers for a live PWM inverters and an encoder sensed fan/vane angle experiment. Ask us about a free pass.

Sept. 14-15: VisSim at Embedded Systems Conference  Boston, Mass

We will be exhibiting in the Texas Instruments Booth 501-G
We will be showing VisSim in action creating F2812/LF2407/MSP430 based controllers for a live PWM actuated, encoder sensed fan/vane angle experiment. We will also be showing our C6713 and C5510 support.

 See you there!

June 30-July 2: VisSim at American Control Conference  Boston, Mass

Professors Kolk and Shetty from the University of Hartford will be showing their Mechatronics experiments and Curriculum.
We will be showing VisSim in action creating F2812/LF2407/MSP430 based controllers for a live PWM actuated, encoder sensed fan/vane angle experiment. We will also be showing our C6713 and C5510 support. Click here to enroll

February 20: TI MSP430 Target now supported by VisSim/Embedded Controls Developer

VisSim/ECD now supports the TI MSP430 low power microprocessor family. VisSim's unique ability to generate tight, efficient fixed point code greatly reduces development time for this platform.

February 18-20: VisSim at TI Developers Conference  Houston, Texas

See VisSim in action creating F2812/LF2407/MSP430 based controllers for a live PWM actuated, encoder sensed fan/vane angle experiment.We will

also be showing our C6713 and C5510 support. Click here to enroll

November 17: One full day of hands on VisSim/Embedded Controls Developer training Munich

Get your hands on a TI DSP and learn how to create embedded DSP applications the fast way. VisSim/ECD will be demonstrated including fixed point simulation and codegen, DSP peripheral programming, FLASH burn, motor control, and general control.
Cost is 150 Eu for the seminar and 350 Eu if you would like to take home a TI eZdsp F2812 or LF2407 evaluation kit. The seminar will be held at the Hilton Tucher Park, Munich. Lunch is provided. Please email seminar@vissol.com for more information.

November 11-20: VisSim/Embedded Controls Developer at TI European Developers Conference

in Prague, Paris, Munich, Birmingham

See VisSim in action creating F2812/LF2407 based controllers for a live PWM actuated, encoder sensed fan/vane angle experiment.
Schedule: Prague - Nov. 11; Paris - Nov. 13; Munich - Nov. 18; Birmingham - Nov. 20

Ask us about a free pass.
 Click here to enroll in the European TI developers conference.

April 29, 2003

VisSim/Embedded Controls Developer at Texas Instruments Developers Forum

VisSim will be presented at the TI developers conference at Niederrhein University of Applied Sciences in Krefeld, Germany. Niederrhein University is 50 km from Duesseldorf International Airport, 30 km from Moenchen Gladbach airport.

May 20-22, 2003

VisSim is a 3rd party guest in the TI Booth at PCIM

VisSim demos will be given at PCIM, the power control and intelligent motion show in Nuremburg, Germany.

Click here to learn more about PCIM. Click to receive a free ticket to PCIM 2003

May 5 - July 17, 2003

VisSim/Embedded Controls Developer Demos

VisSim demos will be offered in conjunction with Rutronik, and Texas Instruments. Cost is 150 Eur. Seminars will be in Bielefeld, Hamburg, Berlin, Leipzig, Warsaw, Krakow, Brno, Vienna, Graz, Munich, Budapest, Stuttgart, Lindau, Freiberg
Click to register for a 2003 VisSim European Seminar

November 26-28, 2003

Visual Solutions is the Proud Sponsor of the 1st International Conference on Computational Methods in Fluid Power Technology

This conference will examine methods for solving practical problems in design and control of hydraulic systems. it will be held in Melbourne, Australia 26-28 November 2003. Click to learn more...

Feb 14, 2003

VisSim/Embedded Controls Developer One Day Workshop

A VisSim one-day work-shop will cover basic modeling and simulation in VisSim, including fixed point filter design and implementation. Attendees will also learn how to create efficient fixed point applications for the TI C2000 series industrial control DSP.
Cost is 105 EUR. Click to register for VisSim One Day Workshop in Copenhagen
 

Feb 14, 2003

VisSim/Comm 5.0 now shipping!

The new, improved VisSim/Comm 5.0 is now shipping along with new advanced 802.11b/"Bluetooth" wireless modules and Turbo Code modules. Click here for press release.

Dec 2-5, 2002

VisSim at I/ITSEC show at Orlando, Florida

The Interservice/Industry Training, Simulation and Education Conference (I/ITSEC) promotes cooperation among the Armed Services, Industry, Academia and various Government agencies in pursuit of improved training and education programs. Click here learn more

We will be located in booth 1678. See you there!

Nov 15, 2002

VisSim 5.0 now shipping!

The new, improved VisSim 5.0 is now shipping. Click here for press release.  Click here for technical specifications.

Nov 15, 2002

Full Day VisSim Seminar - November 15, in Munich, Germany

Enroll now for a full day VisSim seminar. Learn how to use Vissim to dramatically reduce development time for dynamic simulation and embedded controls development.
The one day workshop costs 150 Euros (400 Eu. If you wish to take home DSP evaluation hardware) and includes lunch, coffee breaks and workbook. Click here to signup

Nov 11-14, 2002

TI European Developers Conference - November 11-14, in Birmingham, UK, Paris, France, Munich, Germany

Enroll now for one of the three full day seminars. Learn how to use Vissim to dramatically reduce development time for embedded controls development.
The one day workshop costs $100 Euros and includes lunch, coffee breaks and workbook.

VisSim at TI Developers Conference

Visual Solutions staff will be showing VisSim/Embedded Controls Developer at the TI Developers Conference in Houston, Texas, August 7-9. Signup for the hands-on seminar.
Click here to signup for hands-on VisSim/Embedded Controls Developer training

Aug 8, 2002

VisSim/Embedded Controls Developer supports the TI F2812

VisSim now supports the new 32-bit 150 MHz TI F2812 DSP target. Visual Solutions is proud to be the first TI 3rd party to demonstrate working software for this hot new chip.Read the press release.

June 26, 2002

Pictures from the International User Group Conference,Letchworth,UK

Click here to see the pictures

June 13-14, 2002

VisSim International User Group Conference - June 13
VisSim/Embedded Controls Developer Training - June 14 in Letchworth, UK

Enroll now for the International VisSim User Group Conference in Letchworth, England on June 13, 2002.
VisSim 5.0 will be introduced and demonstrated. User presentations are invited. The following day, June 14, will be a one day workshop for embedded controls system development with VisSim 5.0. The User Group Conference is available at no charge, the one day workshop costs $395 ($695 if you wish to receive an LF2407 evaluation board, with C-Compiler , power supply and JTAG interface). Click to register for 2002 VisSim International User Group Conference

May 13, 2002

Sign up for the "VisSim/Texas Instruments C2000 Rapid Prototyper" Full Day Seminar at the PCIM show in Nuremberg, Germany

Specify seminar #24, Monday, May 13, 2002 on the signup sheet.

Seminar will include hands-on training in the use of modern block diagram development of embedded controls systems. Attendees will receive c2407 eZdsp development kits that include JTAG, cable to PC, power supply and DSP board. They will also receive TI Code Composer C and assembler software, plus evaluation copies of VisSim/Embedded Controls Developer. Attendees will be shown how to create control applications that use PWM, CAN, analog & digital I/O, quadrature encoders, SPI and serial port. Sample applications will be created for H-Bridge power control and AC induction motor control.

Click here to sign up for VisSim/TEXAS INSTRUMENTS TMS320C2000 RAPID PROTOTYPER at Nuremberg, Germany

Feb 11, 2002

Signup for the TI Sponsored Rapid Prototyper Web Seminar
TI web seminar info
 
 

May 9, 2001

VSI Releases the VisSim/TI C2000 Rapid Prototyper
Click here for the press release.

October 4, 2000

VSI Signs Software Development Agreement with Texas Instruments (TI)

In June 2000, VSI and TI signed a software development agreement for a custom version of VisSim to support the TI C2000 DSP family of motion control DSPs. Under the agreement, TI funded the development of the VisSim/TI C2000 Rapid Prototyper™, software for the rapid prototyping of motion control systems targeted for implementation on the TI C2000 family of DSPs. The software will be available in two configurations, a simulation version ($3,500 US List Price) that includes VisSim/Motion™ and a lower priced, non-simulation version ($2,500 US List price). The software is expected to be released October 31, 2000 and will support TI F243 and TI LF2407 evaluation boards (EVMs).

The VisSim/TI C2000 Rapid Prototyper™ includes:

• VisSim/Motion: an optional block set that includes pre-built motor, amplifier,
  sensor, encoder, dynamic load and controller for easy and fast simulations of motion control systems.
• A TI C2000 Digital Motor Control (DMC) Block Set that consists of C equivalent (for use in a software only simulation) and C-callable versions (for use in DSP-in-the-loop simulation) of the C2000 DMC assembly routine library.
• The VisSim Fixed Point Block set that consists of the following scaled radix fixed point blocks: sum, multiply, divide, gain, constant, sign, absolute value, table lookup, 1/z, sampleHold, negation, merge, convert, filter (FIR, IIR).
• A VisSim-CCS Plug-in that provides the option of creating a Code Composer Studio (CCS) project of the code targeted for the C2000 DSP.

VSI Signs OEM Agreement with Mathsoft

In June, 2000, VSI and MathSoft signed an OEM Agreement for the integration or bundling of VisSim/Comm Personal Edition (PE), software for modeling and simulating control, communication or signal processing systems or algorithms, with Mathcad 2000. The Communication System Design (CSD) Pack for Mathcad which includes VisSim/Comm PE and the Signal Processing, Image Processing and Wavelets Extension Packs for Mathcad was announced by Mathsoft for immediate availability on September 19, 2000. The CSD is available directly from MathSoft at $ 799. Click here for the more information.

VSI Announces the VisSim/TI C2000 Rapid Prototyper at ESC

VSI presented the VisSim/TI C2000 Rapid Prototyper™, software for the rapid prototyping of motion control systems targeted for implementation on the TI C2000 family of DSPs, with TI at the Embedded Systems Conference September 26 - 28 in San Jose California. The software will be available in two configurations, a simulation version ($3,500 US List Price) that includes VisSim/Motion™ and a lower priced, non-simulation version ($2,500 US List price). The software is expected to be released October 31, 2000 and will support TI F243 and TI LF2407 evaluation boards (EVMs).

VSI announces VisSim/Motion

VSI presented VisSim/Motion™ at the Embedded Systems Conference September 26 - 28 in San Jose, California. VisSim/Motion enables engineers to easily model and simulate motion/motor control systems with a pre-built and proven motion control block library. Engineers select and connect their components (e.g., motor, amplifier, load, encoder, sensor, and controller…) and with the push of a button, run a simulation and view the behavior of their system. VisSim/Motion is based on Visual Solutions award winning VisSim™ software - Winner of the 1999 Readers' Choice Award from Control Magazine. The software has a US List Price of $ 995 and will be released October 31, 2000.

September 19, 2000

VisSim for Mathcad - VisSim 4.5 released

Visual Solutions Incorporated (VSI) announces the immediate availability of VisSim Version 4.5 for Windows 95/98/2000/NT. The version 4.5 upgrade is free to all VisSim Version 4 license holders; for those users with prior versions the cost of the upgrade is $ 750.

VisSim Version 4.5 consists of a "no programming required" OLE/COM compliant integration with Mathcad 2000. This integration provides Mathcad users with a simple and seamless method for performing dynamic system simulations. With VisSim, Mathcad users can now model and simulate control, communication or signal processing systems. Mathcad users can create new, or embed existing, Mathcad documents within a VisSim model by using the new Insert Mathcad Object block. Users can dynamically exchange scalar or matrix data between VisSim and Mathcad using the simple VisSim click and wire interface - no programming required! Click here for more information.

April 10, 2000

Visual Solutions Announces VisSim/CommDSP™ - Rapid Prototyping Software for Communication Systems Targeted at TI DSPs
Click here for more information.

August 25, 1999

Latest Version of Statemate MAGNUM Adds VisSim Software to Offer Breakthrough Hybrid System Modeling
Click here for more information.

May 14, 1999

Visual Solutions Announces VisSim Version 4.0
Click here for more information.

January 4, 1999

VisSim wins First Place in the Readers' Choice Awards from Control Magazine
VisSim received a first place in the Readers' Choice Awards from Control Magazine. The first place award was in the Software, Simulation category. The award shows that VisSim is the choice for easy-to-use, powerful and reliable modeling, simulation and control system design software.