|
Modeling, Simulation & Control |
|
Communication System Design |
|
Model Based Embedded Development
|
|
VisSim is a visual block diagram
language for modeling and simulation of complex nonlinear dynamic
systems. Its fast execution lets you run models in real-time. It is
the core engine for the Comm and Embedded Development products. |
VisSim/Comm™ is an award winning
program
for comprehensive modeling and simulation of end-to-end, physical
layer data communication systems. |
VisSim/Embedded Controls Developer™
is the most efficient visual programming tool available for model
based development. It lets you simulate and generate C-code for
Texas Instruments targets. It has working examples for the
latest
TI developer kits. |
"Due to its power, flexibility,
ease-of-use, and low cost, VisSim
has been Carrier's choice for system modeling, simulation, data
acquisition, and rapid prototyping for over ten years. It is our
choice for model based development."
Mr. Richard Kolk
Willis Carrier Fellow
Manager of Commercial Engineering |
|
|
"I chose VisSim/Comm software to help
me with various R&D and consulting projects. It meets my
criteria for functionality, performance, price and easy learning
curve. When I first started using VisSim I was up and running on
the project within 2-3 days. People thought I was a
guru by the second week. The software pays for itself by
allowing me to perform tasks quicker and easier, leading us to
get new consulting work. The BER simulations definitely run
fast. The general nature of VisSim having the ability to model
projects for disciplines outside the comm arena has been a
definite plus also."
Mark Tigerman
Advanced R&D Technology Engineer |
|
|
|
"“VisSim/ECD provides designers
with the ability to develop an entire application based upon the
F2833x controllers working only at the block diagram level while
utilizing the full performance of the F280x and F2833x series. VisSim/ECD allows
any embedded developer, even those without prior Digital Signal
Controller experience, to quickly bring new products to market.”
Andrew Soukup
TI C2000 worldwide marketing manager |
|
