 |
FOR IMMEDIATE RELEASE
Westford, Massachusetts Oct 31,
2006—Visual Solutions Incorporated
announces the release of target support for the TI F280x industrial DSP
series. This new version includes blocks for supporting the new enhanced
C2000 peripherals including ePWM, eCAP, and eQEP. VisSim includes
resource conflict checking, an important feature for detecting usage
conflicts of the 4-way mux on the F280x pins. I/O port read/write
with resource conflict checking, eCAN . CAN addresses can now be changed
on the fly. Peripheral support includes all 4 Serial Peripheral
Interface (SPI) ports, both SCI ports,
VisSim/Embedded Controls Developer lets you
quickly design and test embedded controllers and filters targeted for
implementation on the Texas Instruments C2000 family of Digital Signal
Processors including the F243, LF240x,LF281x, and F280x.
The VisSim/Embedded Controls Developer
includes:
- VisSim: a block diagram
based modeling, simulation and code generation environment.
- VisSim/Fixed Point™: fixed-point blocks and design tools for
simulation and code generation of 16 bit and 32 bit scaled integer
operations. 32 bit operations make automatic use of IQmath. Fixed
point operations include: sin/cos/atan2/sqrt/shift/transfer
function/abs/merge/case/unit delay/Limit/convert/LCD display
- Peripheral Blocks that automatically generate code for:
- 16 analog inputs
- 16 ePWM outputs, with full configuration of enhanced waveforms
including dynamic phase update, and dynamic period update
- 32 digital I/O
- 2 32 bit eQEP quadrature encoder inputs
- 4 eCAP event capture (up to 1 MHZ resolution)
- 10 MHz SPI channel support
- 2 eCAN 2.0 bus, with six mailboxes
- serial port based LCD display
TI C2000 Digital Motor Control (DMC) Block Set supporting
simulation and code generation of efficient, hand-coded assembler
versions for PI, PID, Park and Clarke transforms, Inverse Park and
Clarke, space vector wave form generators, event interval to speed
conversion.
VisSim-Code Composer Studio (CCS) plug-in for automatic CCS
project creation.
Automatic C code generation of production quality fixed-point
code, compile, link, and JTAG download to the TI MSP430, F243,
LF240x,LF281x and F280x.
TI C2000 CAN Bus Support
From 1x16 to 4x40 Serial LCD Support
Todd Solak, Worldwide Marketing Manager
Digital Controls System Group - Texas Instruments, says this about
VisSim
"The VisSim is well integrated with our
C2000 DSP EVMs . The combination of the VisSim/TI C2000 software and
TI's C2000 DSPs provides designers with an excellent embedded DSP
control platform."
The TI F2808 eZdsp DSK evaluation board is the
perfect complement to VisSim/ECD - 16 analog inputs, 16 PWM outputs (two
complete 6 channel Space Vector drivers), 2 quadrature encoder inputs,
64K of Flash RAM, 2MHZ CAN bus, 4 16-bit timers, 41 digital I/O's, 6
event capture inputs (up to 8 MHZ) all on a single chip!
The VisSim/TI-C2000 Rapid
Prototyper is the smarter, faster way for embedded control design. But
don't take our word for it: call 1-800-VISSIM-1 or email
sales@vissol.com for a free trial
version. For more information go to:
http://www.vissim.com/products/c2000/c2000.html.
The Smarter, Faster Way for Embedded Control
Design
About Visual Solutions
Since 1989, Visual
Solutions has been a pioneer in the development of Windows-based
software for the modeling and simulation of dynamic systems. Their
mission is to provide easy-to-use, powerful and affordable modeling,
simulation and embedded system design software.
For more information contact:
Jim Webb
Sales Manager
Visual Solutions Incorporated
978 392-0100 (ext.18)
jim.webb@vissol.com
|
|
